Custom 5G manufacturer,5G factory

1.25G 1270-1610nm CWDM 150KM DDM SFP 光模块
1.25G SFP optical transceiver module, support 1.25Gb/s and up to 150 km transmission Features: Up to 1.25Gb/s Data Links Hot-Pluggable Duplex LC connector Up to 150km on 9/125μm SMF 1270~1610nm CWDM DFB laser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Maximum Power <1W Commercial operating temperature range: -0°C to 70°C Version available RoHS compliant and Lead Free Applications: Metro/Access Networks 1.25 Gb/s 1000Base-EZX Ethernet 1×Fibre Channel Other Optical Links
- 1.25G 150KM SFP 光模块
- 1.25g sfp+ transceiver
- 1.25g transceiver
- dwdm sfp transceivers
- dwdm transceiver 120km
- cwdm sfp transceivers
查看更多
1.25G 1270-1610nm CWDM 200KM DDM SFP 光模块
1.25G SFP optical transceiver module, support 1.25Gb/s and up to 200 km transmission Features: Up to 1.25Gb/s Data Links Hot-Pluggable Duplex LC connector Up to 200km on 9/125μm SMF 1270~1610nm CWDM DFB laser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Maximum Power <1W Commercial operating temperature range: -0°C to 70°C Version available RoHS compliant and Lead Free Applications: Metro/Access Networks 1.25 Gb/s 1000Base-EZX Ethernet 1×Fibre Channel Other Optical Links
- 1.25G 200KM SFP 光模块
查看更多
1.25G C17-C61 DWDM 180KM DDM SFP 光模块
1.25G SFP optical transceiver module, support 1.25Gb/s and up to 180 km transmission Features: Hot-Pluggable Duplex LC connector Up to 1.25Gb/s data rate 100GHz ITU Grid, C Band DWDM COOLED DFB transmitter, APD photo-detector SMF links up to 180km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption<1.5W Temperature Range: 0~ 70°C RoHS compliant Applications: 1G Fibre channel DWDM Networks Fibre channel
- 1.25G 180KM SFP 光模块
- dwdm transceiver 180km
查看更多
SFP 1.25G TX 1490 RX 1550 CWDM 180KM DDM 光模块
Features: Up to 1.25Gb/s Data Links Hot-Pluggable Single LC connector Up to 180km on 9/125μm SMF 1490nm DFB laser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Power dissipation<1.5W operating temperature range: 0°C to 70°C RoHS compliant and Lead Free Applications: 1000Base-ZX Ethernet Metro/Access Networks 1×Fibre Channel Other Optical Links
- 1.25G sfp+ transceiver
- 1.25G transceiver
- cwdm transceiver 180km
查看更多
SFP 1.25G TX 1550 RX 1490 CWDM 180KM DDM 光模块
Features: Up to 1.25Gb/s Data Links Hot-Pluggable Single LC connector Up to 180km on 9/125μm SMF 1550nm DFB laser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Power dissipation<1.5W operating temperature range: 0°C to 70°C RoHS compliant and Lead Free Applications: 1000Base-ZX Ethernet Metro/Access Networks 1×Fibre Channel Other Optical Links

查看更多
5G前传半有源波分复用系统助力运营商5G快速部署
功能特点支持无线前传及其它业务综合接入，兼顾无线前传、专线、家宽业务承载，最大化前传网络价值；最大程度节省光纤，一芯光纤可承载9路4G & 5G前传CPRI/eCPRI业务；局端有源、远端无源，采用WDM技术扩展纯透明传输的物理通道，无时延和抖动引入；支持对各通道的收发光功率的监测功能，易于维护、故障定位；支持光层1:1保护，保护倒换时间小于20ms，提升网络可靠性；光层保护功能板可根据应用场景选配，支持热插拔、掉电/上电保持功能，保证设备在掉电情况下不影响业务运行；支持SNMP、Web等多种图形化界面网管；局端有源设备支持交流220V 、直流-48V供电可选，1+1电源输入保护；安装方式灵活，局端设备支持机架式安装和挂墙安装，远端设备支持机架式、抱杆和壁挂安装，安装简易，即插即用；远端室外型设备满足IP67标准要求，支持抱杆和壁挂安装。
- 波分复用
- 5G前传半有源
- 运营商5G快速部署
查看更多
4G/5G 前传无源波分复用器
为满足数据流量的高速增长需求，运营商需不断地增加基站数量。传统的建站方式需要新建机房、购置设备及相关配套器件、投入人力等，周期长、投资与运维成本高。为避免传统建站方式带来的缺点，运营商逐渐采用将多个BBU（Base Band Unit，基带处理单元）集中放置的方式。这种建站方式降低了机房租金投入、设备成本投入、人力投入等，使得工期大大缩减、投资运维成本大幅降低。但这种方式对光纤资源需求较大。若光纤资源匮乏或无管道资源，则较难实施。瑞东光电公司的基站拉远光纤扩容系统，提供了一种既可实现BBU集中放置，又能大大减少光纤需求的建网方案。在光纤扩容系统中，通过在BBU和RRU上使用配套的彩光模块，提供不同波长的业务信号。将承载各个波长业务信号的光纤，分别连接到BBU侧和RRU侧的光纤扩展器。两侧的光纤扩展器将不同波长的信号通过线路侧的一条光纤进行传输，从而节省大量的光纤资源。
- 4G/5G 前传无源波分复用器
- 5G
- 无源波分复用
查看更多

搜索